Table of Contents
pdftops - Portable Document Format (PDF) to PostScript converter (version
2.02)
pdftops [options] [PDF-file [PS-file]]
Pdftops converts
Portable Document Format (PDF) files to PostScript so they can be printed.
Pdftops reads the PDF file, PDF-file, and writes a PostScript file, PS-file.
If PS-file is not specified, pdftops converts file.pdf to file.ps (or file.eps
with the -eps option). If PS-file is '-', the PostScript is sent to stdout.
Pdftops reads a configuration file at startup. It first
tries to find the user's private config file, ~/.xpdfrc. If that doesn't exist,
it looks for a system-wide config file, typically /usr/local/etc/xpdfrc
(but this location can be changed when pdftops is built). See the xpdfrc(5)
man page for details.
Many of the following options can be set with
configuration file commands. These are listed in square brackets with the
description of the corresponding command line option.
- -f number
- Specifies
the first page to print.
- -l number
- Specifies the last page to print.
- -level1
- Generate Level 1 PostScript. The resulting PostScript files will be significantly
larger (if they contain images), but will print on Level 1 printers. This
also converts all images to black and white. No more than one of the PostScript
level options (-level1, -level1sep, -level2, -level2sep, -level3, -level3Sep)
may be given. [config file: psLevel]
- -level1sep
- Generate Level 1 separable
PostScript. All colors are converted to CMYK. Images are written with separate
stream data for the four components. [config file: psLevel]
- -level2
- Generate
Level 2 PostScript. Level 2 supports color images and image compression.
This is the default setting. [config file: psLevel]
- -level2sep
- Generate
Level 2 separable PostScript. All colors are converted to CMYK. The PostScript
separation convention operators are used to handle custom (spot) colors.
[config file: psLevel]
- -level3
- Generate Level 3 PostScript. This enables
all Level 2 features plus CID font embedding. [config file: psLevel]
- -level3Sep
- Generate Level 3 separable PostScript. The separation handling is the same
as for -level2Sep. [config file: psLevel]
- -eps
- Generate an Encapsulated PostScript
(EPS) file. An EPS file contains a single image, so if you use this option
with a multi-page PDF file, you must use -f and -l to specify a single page.
No more than one of the mode options (-eps, -form) may be given.
- -form
- Generate
a PostScript form which can be imported by software that understands forms.
A form contains a single page, so if you use this option with a multi-page
PDF file, you must use -f and -l to specify a single page. The -level1 option
cannot be used with -form.
- -opi
- Generate OPI comments for all images and forms
which have OPI information. (This option is only available if pdftops was
compiled with OPI support.) [config file: psOPI]
- -noembt1
- By default, any
Type 1 fonts which are embedded in the PDF file are copied into the PostScript
file. This option causes pdftops to substitute base fonts instead. Embedded
fonts make PostScript files larger, but may be necessary for readable output.
[config file: psEmbedType1Fonts]
- -noembtt
- By default, any TrueType fonts
which are embedded in the PDF file are copied into the PostScript file.
This option causes pdftops to substitute base fonts instead. Embedded
fonts make PostScript files larger, but may be necessary for readable output.
Also, some PostScript interpreters do not have TrueType rasterizers. [config
file: psEmbedTrueTypeFonts]
- -noembcidps
- By default, any CID PostScript fonts
which are embedded in the PDF file are copied into the PostScript file.
This option disables that embedding. No attempt is made to substitute
for non-embedded CID PostScript fonts. [config file: psEmbedCIDPostScriptFonts]
- -noembcidtt
- By default, any CID TrueType fonts which are embedded in the
PDF file are copied into the PostScript file. This option disables that
embedding. No attempt is made to substitute for non-embedded CID TrueType
fonts. [config file: psEmbedCIDTrueTypeFonts]
- -paper size
- Set the paper size
to one of "letter", "legal", "A4", or "A3". This can also be set to "match",
which will set the paper size to match the size specified in the PDF file.
[config file: psPaperSize]
- -paperw size
- Set the paper width, in points. [config
file: psPaperSize]
- -paperh size
- Set the paper height, in points. [config
file: psPaperSize]
- -duplex
- Set the Duplex pagedevice entry in the PostScript
file. This tells duplex-capable printers to enable duplexing. [config file:
psDuplex]
- -opw password
- Specify the owner password for the PDF file. Providing
this will bypass all security restrictions.
- -upw password
- Specify the user
password for the PDF file.
- -q
- Don't print any messages or errors. [config file:
errQuiet]
- -cfg config-file
- Read config-file in place of ~/.xpdfrc or the system-wide
config file.
- -v
- Print copyright and version information.
- -h
- Print usage information.
(-help and --help are equivalent.)
The Xpdf tools use the following
exit codes:
- No error.
- Error opening a PDF file.
- Error opening an output file.
- Error related to PDF permissions.
- Other error.
The pdftops software
and documentation are copyright 1996-2003 Glyph & Cog, LLC.
xpdf(1)
,
pdftotext(1)
, pdfinfo(1)
, pdffonts(1)
, pdftopbm(1)
, pdfimages(1)
, xpdfrc(5)
http://www.foolabs.com/xpdf/
Table of Contents