-
+<page>
- Specifies the first page to show. If + is given without a number,
the last page is assumed; the first page is the default.
-
-allowshell
- This option enables the shell escape in PostScript specials. (For
security reasons, shell escapes are disabled by default.) This option
should be rarely used; in particular it should not be used just to
uncompress files: that function is done automatically if the file name
ends in .Z or .gz . Shell escapes are always turned off if the -safer
option is used.
-
-altfont <font>
- Declares a default font to use when the font in the dvi
file cannot be found. This is useful, for example, with PostScript fonts.
Defaults to cmr10
-
-background <color>
- uses <color> as background color
-
-bg <color>
- same as -background
-
-debug <bitmask>
- If nonzero, prints additional information on standard
output. The number is taken as a set of independent bits. The meaning
of each bit follows. 1=bitmaps; 2=dvi translation; 4=pk reading;
8=batch operation; 16=events; 32=file opening; 64=PostScript
communication; 128=Kpathsea stat(2) calls; 256=Kpathsea hash
table lookups; 512=Kpathsea path definitions; 1024=Kpathsea path
expansion; 2048=Kpathsea searches. To trace everything having to do
with file searching and opening, use 4000. Some of these debugging
options are actually provided by Kpathsea. See the `Debugging' section
in the Kpathsea manual.
-
-density <density>
- Determines the density used when shrinking bitmaps
for fonts. A higher value produces a lighter font. The default value is
40. For monochrome displays; for color displays, use -gamma. See also
the `S' keystroke. Same as -S.
-
-foreground <color>
- Uses <color> as foreground color
-
-fg <color>
- same as -foreground
-
-gamma <gamma>
- Controls the interpolation of colors in the greyscale
anti-aliasing color palette. Default value is 1.0. For 0 < gamma < 1,
the fonts will be lighter (more like the background), and for gamma
> 1, the fonts will be darker (more like the foreground). Negative
values behave the same way, but use a slightly different algorithm. For
color and grayscale displays; for monochrome, see -density. For color
and greyscale displays; for monochrome, see -density. See also the `S'
keystroke.
-
-geometry <string>
- Specifies an initial X-Window geometry string.
-
-grid1 <color>
- Determines the color of level 1 grid (default as foreground)
-
-grid2 <color>
- Determines the color of level 2 grid (default as foreground)
-
-grid3 <color>
- Determines the color of level 3 grid (default as foreground)
-
-gspalette <palette>
- Specifies the palette to be used when using Ghostscript
for rendering PostScript specials. Possible values are
- Color,
- Greyscale,
- Monochrome.
The default is Color.
-
-gsalpha
- Causes Ghostscript to be called with anti-aliasing enabled in
PostScript figures, for a nicer appearance. It is available on newer versions
of Ghostscript.
-
-hush
- Causes Windvi to suppress all suppressible warnings.
-
-hushchars
- Causes Windvi to suppress warnings about references to characters
which are not defined in the font.
-
-hushchecksums
- Causes Windvi to suppress warnings about checksum
mismatches between the dvi file and the font file.
-
-hushspecials
- Causes Windvi to suppress warnings about special strings that
it cannot process.
-
-keep
- Sets a flag to indicate that Windvi should not move to the home position
when moving to a new page. See also the `k' keystroke.
-
-margins <dimen>
- This determines the “home” position of the page within
the window as follows. If the entire page fits in the window, then the
margin settings are ignored. If, even after removing the margins from the
left, right, top, and bottom, the page still cannot fit in the window, then
the page is put in the window such that the top and left margins are
hidden, and presumably the upper left-hand corner of the text
on the page will be in the upper left-hand corner of the window.
Otherwise, the text is centered in the window. The dimension should
be a decimal number optionally followed by any of the two-letter
abbreviations for units accepted by (pt, pc, in, bp, cm, mm, dd, cc or
sp). See also -sidemargin, -topmargin , and the keystroke ` M
.'
-
-mfmode <mode-def>
- Specifies a mode-def string, which can be used in
searching for fonts. Generally, when changing the mode-def, it is also
necessary to change the font size to the appropriate value for that mode.
This is done by adding a colon and the value in dots per inch; for example,
-mfmode ljfour:600. This method overrides any value given by the
-p command-line argument. The metafont mode is also passed to
METAFONT during automatic creation of fonts. By default, it is
ljfour:600
-
-mgs <size>
- Same as -mgs1 .
-
-mgs[n
- <size>] Specifies the size of the window to be used for the “magnifying
glass” for Button n . The size may be given as an integer (indicating that
the magnifying glass is to be square), or it may be given in the form width
× height. Defaults are 200×150, 400×250, 700×500, 1000×800, and
1200×1200.
-
-nogrey
- Turns off the use of greyscale anti-aliasing when printing shrunken
bitmaps. (For this option, the logic of the corresponding resource is
reversed: -nogrey corresponds to grey:off and +nogrey to grey:on See
also the `G' keystroke.
-
-nomakepk
- Turns off automatic generation of font files that cannot be found by
other means.
-
-nopostscript
- Turns off rendering of PostScript
specials. Bounding boxes, if
known, will be displayed instead. This option can also be toggled with the `
v ' keystroke.
-
-noscan
- Normally, when PostScript
is turned on, Windvi will do a preliminary
scan of the dvi file, in order to send any necessary header files before
sending the PostScript code that requires them. This option turns off such
prescanning. (It will be automatically be turned back on if Windvi detects
any specials that require headers.)
-
-offsets
- Specifies the size of both the horizontal and vertical offsets of the output
on the page. This should be a decimal number optionally followed
by “ cm ”, e.g. , 1.5 or 3cm , giving a measurement in inches or
centimeters. By decree of the Stanford TEX Project, the default TEX
page origin is always 1 inch over and down from the top-left page
corner, even when non-American paper sizes are used. Therefore,
the default offsets are 1.0 inch. See also -xoffset and -yoffset
.
-
-p <dpi>
- Defines the size of the fonts to use, in pixels per inch. The default
value is 600.
-
-qpaper <papertype>
- Specifies the size of the printed page. This may be of
the form width×height (or width×heightcm), where width is the width in
inches (or cm) and height is the height in inches (or cm), respectively.
There are also synonyms which may be used: us (8.5x11), usr (11x8.5), legal
(8.5x14), foolscap (13.5x17), as well as the ISO sizes a1 - a7 , b1 - b7 , c1 -
c7 , a1r - a7r ( a1 - a7rotated), etc. The default size is 21 x 29.7
cm.
-
-rv
- Causes the page to be displayed with white characters on a black
background, instead of vice versa.
-
-s <shrinkfactor>
- Defines the initial shrink factor. The default value is to
choose en appropriate factor.
-
-S <density>
- Same as -density, q.v.
-
-sidemargin <dimen>
- Specifies the side margin (see -margins).
-
-topmargin <dimen>
- Specifies the top and bottom margins (see -margins).
-
-version
- Displays the version number and exits.
-
-xoffset <dimen>
- Specifies the size of the horizontal offset of the output on
the page. See -offsets .
-
-yoffset <dimen>
- Specifies the size of the vertical offset of the output on the
page. See -offsets .
-
-xform
- Turns on graphical transformations, which allows to apply any
transformation to glyph boxes.